looper pedal board PROG-5 Programmable Looper

looper pedal board PROG-5 Programmable LooperWe are due to have PROG 5 back in stock mid June. Introducing our first programmable looper, the PROG 5, which has been designed to be straightforward and intuitive in use with no menus to dive into. Built into a compact enclosure, the looper has five loops in series plus a CTL TRS 1 4 output for amp channel switching. All signal switching is done with gold contact relays with a passive signal path. There are eight presets over two banks (A&B) of four

We are due to have PROG-5 back in stock mid June.

Introducing our first programmable looper, the PROG-5, which has been designed to be straightforward and intuitive in use with no menus to dive into.

Built into a compact enclosure, the looper has five loops in series plus a CTL TRS 1/4” output for amp channel switching.  All signal switching is done with gold contact relays with a passive signal path.

There are eight presets over two banks (A&B) of four that can be quickly programmed using just the footswitches while in preset programming mode.

The CTL output can be used to switch amp channels on amps that take latching channel TRS switching, or effect pedal control like on the Boss JB-2, or in switching remote loopers such as the Bright Onion Pedals Dual Remote Looper.

The CTL out has internal switches for setting the LED polarity if needed, plus a ground lift switch to avoid possible ground loops with amp switching.

The pedal is built with:

• Hammond aluminium enclosure
• Neutrik plug sockets
• Heavy duty soft touch footswitches
• Gold contact relay switching
• Five set order loops in series
• CTL TRS 1/4” output
• 2.1mm 9v-18v centre negative DC Socket (200mA)

PROG-5 dimensions:
133x101x61mm

Download Manual